Semiconductor TVOC Sensor FS00602
TVOC sensor module
Semiconductor sensor
MEMS hotplate technology
Calibrated before leaving factory
Waterproof, oilproof, dustproof
Reliable service for sustainable cooperation
Semiconductor TVOC Sensor FS00602 Introduction
Gas sensors based on MEMS hotplate technology use metal oxide semiconductor materials with low conductivity in clean air. When the sensor is exposed to a gas environment, the conductivity of the sensor changes with the concentration of the detected gas in the air. The higher the concentration of the gas, the higher the conductivity of the sensor. By using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the concentration of the gas. The FS000602 TVOC sensor uses advanced semiconductor gas sensing elements. This sensor has high sensitivity to organic volatile gases such as formaldehyde, benzene, alcohol, smoke, and carbon monoxide. After precise automatic calibration and detection equipment, the consistency and accuracy of the data are ensured. The sensor features a unique nano-material film that makes it waterproof, oil-proof, and dust-proof.
Semiconductor TVOC Sensor FS00602 Features
1.Detection type
Organic volatile gases such as formaldehyde, benzene, alcohol, smoke, and carbon monoxide.
2.Detection range includes:
TVOC：0~5000μg/m³
HCHO：0~1500μg/m³ (simulated)
CO2：400~5000ppm (simulated)
3.High accuracy, high consistency
Max error ≤ 10% reading
Consistency ≥ 90%
4.Solution
0.001 mg/m³ or 1ppm
5.The TVOC sensor is Waterproof, oilproof, dustproof
6.Output method
The output method is default as UART
7.High detection frequency
The data updates once per second by default.
8.Long service life
The service life is up to 10 years (in the air)
Semiconductor TVOC Sensor FS00602 Features
1.Air Quality Monitoring Equipment
2.Fresh air ventilation system, air purifier
3.Air conditioners, smart home devices
4.Hospitals, hotels, schools and other public places
Specifications
Parameter type | Parameter index | |
Detection Type | HCHO, benzene, alcohol, smoke, and CO | |
Detection solution | 0.001 mg/m³ or 1ppm | |
Detection Range |
TVOC：0~5000μg/m³
| |
HCHO：0~1500μg/m³ (simulated)
| ||
CO2：400~5000ppm (simulated)
| ||
Detection Accuracy | Batch consistency | ≥ 90%
|
Data Accuracy | Max error ≤10% Reading | |
Operation Voltage | DC 3.7V～6V | |
Operation Current | <10mA (@5V power supply) | |
Stable Time | 5S | |
Detection Frequency | The data is updated once per second (Default) | |
Output Methods | Default: UART (3.3V_TTL Voltage level) | |
Service Life | 10 Years (in the air) | |
Reference Dimension | 17.8×15.2×2.7 mm | |
Operation Temperature | 0℃～ 50℃ | |
Operation Humidity | 15%～90%RH (Non-Condensation) | |
Storage Temperature | -10℃ ～ 50℃ | |
Storage Humidity | 0～99%RH (Non-Condensation) | |
