Battery Thermal Runaway Monitoring Sensor FS02208
- High accuracy and repeatability
- Fast response time
Battery Thermal Runaway Monitoring Sensor FS02208 Introduction
FS02208 is a battery thermal runaway monitoring sensor that can provide an external interface and continuously measure CO2, CO, HC, H2, while automatically compensating for temperature and pressure. It has a modular design and provides both digital and analog signal output functions, making it easy to integrate and control.
Battery Thermal Runaway Monitoring Sensor FS02208 Features
This can achieve an external interface and automatically complete temperature and pressure compensation while measuring CO2, CO, HC, H2 continuously.
Short start-up time and preheating time.
Modular design with both digital and analog signal output functions, which is easy to integrate and control.
High accuracy and repeatability, fast response time, up to 170ms.
Application
1.New energy vehicles, trams
2.Energy storage power station, power system
3.Battery Safety Monitoring Equipment
Specifications
Detection principles | CO2：Dual Beam NDIR CO/HC/H2：MOX PM dust: optical scattering principle Pressure：Piezoresistive Temperature: NTC |
Detection parameters | CO2、CO/HC/H2、PM、temperature, pressure |
Detection ranges | CO2： 0ppm-10000ppm CO/HC/H2：1-1000ppm PM：0-5mg/m³ Air Pressure：80kPa~120kPa Temperature：-40℃~125℃ |
Resolution | CO2/CO/HC/H2：1ppm PM：1ug/m³ Air Pressure：0.1kPa Temperature：0.1℃ |
Detection accuracy | CO2: ±(50ppm+5% of reading)
CO/HC/H2: ±40ppm or ±30% of reading (whichever is greater)
PM: ≤100μg/m³: ±15μg/m³; ＞100μg/m³: ±15% of reading
Pressure P: ±0.1kPa
Temperature T: ±2℃ |
Data refresh rate | ≤1s |
Response time | T90<15s |
Output mode | CAN/LIN/UART |
Operating conditions | -40℃~+85℃, 0~99%RH (non-condensing). |
Storage conditions | -40℃~+95℃, 0~99%RH (non-condensing). |
Operating pressure | 80kPa~120kPa |
Power supply voltage | 9~16VDC, with standard voltage at +12VDC. |
Average working current | Normal operating mode: ≤150mA, @+12VDC (PM measurement intermittent operation)
Low power mode: ≤50mA, @+12VDC (CO2 sensor intermittent operation, PM and MOX sensor trigger operation, Temperature T and Pressure P normal operation) |
Static current | <100uA in sleep mode |
